Verified Milking Machine Manufacturers in India
A commercial milking machine takes milk from dairy animals by vacuum, from bucket units to full parlours. Dairy farms and milk producers buy it. diipl finds a verified Indian maker for each buyer and arranges a direct meeting.
Also called: cow milking machine, buffalo milking machine, dairy milking machine, bucket milking machine, milking equipment.
in India
from abroad
this machine
What is a commercial milking machine?
A milking machine takes milk from a dairy animal with a steady vacuum. A pulsator opens and closes a flexible rubber liner around the teat about once each second, which massages the teat so that blood keeps flowing. Four teat cups, each with a liner inside a shell, make up a cluster, and short and long milk tubes carry the milk away. A vacuum pump and a regulator keep the working vacuum steady. The milk ends up in a bucket, a can, or a sealed pipeline that runs to a cooling tank. Systems range from portable bucket sets to pipeline systems and parlours where a batch of animals is milked together. Washing after every milking keeps the milk safe.
This page covers commercial milking machines and parlours for dairy farms; small home-use or hobby units are not covered.
How diipl verifies milking machine manufacturers
diipl checks every milking machine manufacturer before a buyer meets them. Every seller is GSTIN verified and capacity audited. IEC and the certifications your product and market need (ISO, CE, REACH, BIS) are confirmed before any meeting; Certificate of Origin and EIC inspection are arranged per shipment where required.
For milking machines, the capacity audit also covers:
- A vacuum pump test on the factory floor showing free air flow and working vacuum against the rated figures, and a wet test with an artificial udder and water to show the vacuum drop to the milk line
- A pulsator bench check showing a steady rate and open to closed ratio on every unit in a batch
- A regulator check showing the working vacuum holds steady when air flow changes
- Stainless steel finish and welds on milk pots, buckets and pipework, and a stock of liners and milk tubes in the store
- A full set assembled and run on the factory floor, with a written test record kept for the buyer
We match your requirement to a manufacturer that has passed these checks and arrange a direct meeting.
Types of milking machines we cover
Indian milking machine manufacturers on the diipl bench build these commercial and industrial types.
| Type | Typical buyers |
|---|---|
| Bucket and trolley milking set | Dairy farms that keep animals in cowsheds |
| Direct-to-can milking set | Dairy farms running a small abreast parlour |
| Pipeline milking system | Dairy farms with a medium or large herd and a bulk cooling tank |
| Herringbone parlour | Commercial dairy farms with a growing herd |
| Rotary parlour | Large dairy projects planning a high-throughput parlour |
Bucket and trolley milking set
A portable set with a pulsator, a teat-cup cluster and a lidded bucket of about 15 litres, moved from animal to animal. Without a trolley, one operator can use only 2 or 3 sets effectively, so output is not more than about 30 cows an hour. A trolley carrying the milk cans, a spare bucket and udder preparation equipment lets an extra set be used, raising it to about 40. Choose it for herds kept in cowsheds.
Direct-to-can milking set
Milk flows from the teat cups into a can through a specially designed lid that connects the can to the vacuum supply, so manual lifting, carrying and tipping of milk is eliminated. It was devised for abreast parlours, where one operator can manage a 4 unit, 8 stall or a 5 unit, 10 stall parlour. Choose it for less milk handling than bucket sets, without a full pipeline.
Pipeline milking system
Milk travels from the udder through a sealed vacuum pipeline straight to a refrigerated bulk milk tank, and the equipment is cleaned in place. Such systems were first installed in cowsheds and milking barns and now suit medium and large herds milked in parlours. More than 85 cows per man-hour can be reached, and the labour needed is low. Some systems remove the cluster automatically when milk flow ceases.
Herringbone parlour
Animals stand in echelon at an angle of 30 to 35 degrees and are milked in batches, with the operator controlling entry and exit. A UN guide describes it as suited to herds of 50 to 400 cows. Choose it for a growing commercial herd that needs steady milking throughput.
Rotary parlour
Animals walk onto a turning platform one at a time and are milked as it rotates. The UN guide describes rotary abreast, with cows facing inward and no moving parts on the platform, rotary tandem, with cows nose to tail in stalls, and rotary herringbone, with animals facing outward around a central work area. diipl first checks whether a verified Indian maker can build the layout asked for.
What to specify when buying a milking machine
A clear milking machine specification gets you comparable offers and a faster meeting. Share these points with diipl and we match them to the right manufacturer.
| What to specify | Why it matters |
|---|---|
| Milking system type | Bucket, direct-to-can, pipeline and parlour systems differ in labour needed and milk handling. Match the system to herd size and shed layout before comparing offers from makers. |
| Animal type and herd size | Say whether the machine will milk cows, buffaloes or both, and how many animals are in milk. Machines made for cattle often need changes for buffaloes, so agree liners, cluster weight and settings for each species. |
| Number of milking units and stalls | Throughput depends on how many units you run and the unit time, which is milking time plus idle time per animal. In the 1989 FAO worked example, a unit time of 6 minutes lets 2 units milk 20 cows an hour. |
| Vacuum pump free air capacity, with reserve | At 50 kPa the 1989 FAO guide gives about 70 litres of free air a minute per unit for 20 unit plants and 85 for 5 unit plants. Its ISO 5707 outline asks for a reserve. Ask for free air, not motor power. |
| Working vacuum level and regulator | The 1989 FAO guide gives 40 to 50 kPa as the normal working vacuum for cows, with a good regulator holding it within plus or minus 2 kPa. Ask for a line vacuum gauge and the regulator's air flow capacity. |
| Average liner vacuum at a stated milk flow | A fact sheet on liners says the ISO milking machine standard asks the maker to state a milk flow rate and the desired average liner vacuum at that flow in the user manual. Ask for both values in writing. |
| Pulsation rate and open to closed ratio | Pulsators open and close the liners about once each second, and the 1989 FAO guide says that for udder health the ratio is usually no wider than 70:30. Ask for the pulsator's rate and ratio in writing. |
| Cluster and tube dimensions | The 1989 FAO guide gives minimums of 80 ml for the claw bowl, 8 mm for short milk tubes and 12.5 mm for long milk tubes. Ask the maker for the dimensions of every cluster part. |
| Liner fit to the teats | Liner fit to teat size is listed first among machine factors for teat condition. If teats are measured, a liner barrel 1 to 2 mm narrower than the average teat width lowers the risk of poor fit. |
| Milk-contact materials and finish | Shells and claws are usually stainless steel or plastic, while liners and milk tubes are rubber. Ask what each part that touches milk is made of and how it is cleaned. |
| Pipeline diameter, interceptor and vacuum drop (pipeline systems) | The 1989 FAO guide, outlining the 1983 edition of ISO 5707, gives a pipeline vacuum drop of no more than 3 kPa and a 15 litre interceptor. Later editions may differ: ask for current figures and a layout drawing. |
| Cleaning method and hot water supply | Pipeline systems are cleaned in place, and the 1989 FAO guide gives 12 litres of water at 85 degrees Celsius per unit for recirculation cleaning. Ask how every milk-contact part is cleaned and check that the farm can supply hot water. |
| Pump drive and power supply | The vacuum pump may be driven by an electric motor or a stationary engine. Give the farm's voltage and phase, and ask whether an engine drive is possible when supply is unreliable. |
| Commissioning test, annual test and spare kit | The 1989 FAO guide says a full test by an experienced technician is needed once a year, with liners renewed every six months or 2,000 cow milkings. Ask for the commissioning test record and a first-year kit of liners and tubes. |
Who buys milking machines
Milking Machines are bought by these commercial and industrial buyers, in India and abroad.
Buyers in India
- Commercial dairy farms moving from hand milking to machine milking
- Dairy farms that supply milk to cooperatives and private dairies
- Milk producer companies and farmer groups that equip member farms
- Cattle farms run by trusts, institutions and corporates
- Dealers and installers of dairy farm equipment who serve farms in their region
Buyers abroad
- Commercial dairy farms in Africa
- Dairy farm projects in the Middle East and the GCC
- Dairy farms and producer groups in South-East Asia
- Dealers and distributors of dairy farm equipment in South Asia and Africa
HSN code and ITC-HS code for milking machines
Milking machines are classified under ITC-HS 84341000 (milking machines), within HS subheading 843410 (milking machines). The 6-digit subheading is the same in every country that uses the Harmonized System; the 8-digit ITC-HS line is the one India files.
Some machines on this page use a different line:
- 84368090 (other, within subheading 843680: machinery; for agricultural, horticultural or forestry use and n.e.c. in heading no. 8436) when the quote is only for a powered rotary platform with its drive and no milking equipment.
In a herringbone or rotary parlour the milking equipment takes this line, but no official text we could confirm settles the stalls, gates and platform quoted as one installation, so confirm it before you file.
In India the GST HSN code and the export ITC-HS code come from the same nomenclature. A GST invoice needs only the first 4 or 6 digits, depending on your turnover; the export shipping bill carries the full 8-digit ITC-HS line. The classification is shown here; the applicable GST rate is not. Official source.
Chapter
84
Machinery & Mechanical Equipment
Heading (4)
8434
Product group
Subheading (6)
843410
International, same worldwide
ITC-HS (8)
84341000
India files this line
Commonly confused with
Neighbouring subheadings under heading 8434. Misclassification between them is a common cause of a customs re-assessment.
- 843420 (Dairy machinery)
- 843490 (Milking machines and dairy machinery; parts thereof)
India's exports, FY25-26
about $1.5 million
under ITC-HS 84341000. Source: DGCIS / MoC.
Your opportunity
Indian milking machine makers already ship this line abroad. diipl finds the markets where your machine can win and generates the verified buyers there.
A classification is a fact any lookup can give you. The correct code still does not tell you which countries are buying milking machines right now, what duty each of them charges on the Indian line, or whether that demand is growing or fading. Those answers come from trade data, not from a code table, and they decide whether a market is worth entering. diipl's free Market Research Report answers them for your machine.
The markets that decide your strategy
Your free report shows who buys milking machines from India the most, where demand grows steadily, and where it is emerging, so you target the markets you can actually win.
Who buys from India the most
The markets buying the most from India today.
- Top market
- Top market
- Top market
- Top market
- Top market
Where growth is consistent
Steady, rising demand, not one-off spikes.
- Top market
- Top market
- Top market
- Top market
Where demand is emerging
The fastest-growing import markets.
- Top market
- Top market
- Top market
- Top market
Buying a milking machine in India
- Ask for a GST invoice that lists the model, the number of milking units and the pump rating, so the equipment is easy to identify later.
- Agree that the maker's engineer will install and commission the machine and hand over a vacuum, regulator and pulsation test record before you accept delivery.
- Have the maker train the people who milk, on their own animals: attaching and removing clusters, spotting liner wear and washing the set after every milking. Let the animals get used to the pump noise and the machine in steps before full use.
- Collect a first-year spares kit with liners, milk tubes and pulsator parts, and ask where the nearest service engineer is based.
- For delivery and foundation, get a layout drawing before dispatch showing the pump room, pipe route, floor slope and drain, and for parlours the pit and platform. Agree who does the civil work.
- Check the pump motor against the farm's power supply, and ask whether an engine drive is possible as a backup.
Buying from Indian milking machine exporters
- Incoterms: state who arranges sea freight and insurance. Ask for sealed export packing with moisture protection for the vacuum pump, motor and control box, and for liners and tubes to be packed and labelled separately.
- Certificate of Origin: confirm with your clearing agent whether it is needed for duty treatment in your region, and ask the maker to arrange it with the issuing agency in India and send it with the invoice and packing list.
- Electrical match: give the maker your voltage, frequency and whether supply is single phase or three phase, in writing, so the pump motor and control box are built for it. Ask if an engine drive is offered where supply is unstable.
- Test records and manual data: ask for the factory test record of pump capacity, regulator and pulsation, and for the user manual data the ISO milking machine standard calls for, such as a stated milk flow rate and the desired average liner vacuum. Add a declaration of conformity if your region needs one for machinery.
- Spares and remote support: order liners, short and long milk tubes and pulsator parts with the machine, since liners are changed on a schedule, and ask for video guidance on assembly and daily cleaning.
- Documents and safety points: ask for operating and cleaning instructions in the farm team's language, pipeline and parlour drawings where they apply, and guards over the pump drive belts, a silencer and, for oil lubricated pumps, an oil separator, as the FAO guide recommends.
Standards and certifications for milking machines
Milking Machines for each market must meet that market's rules. diipl confirms the certifications your market needs before any meeting. Each requirement below links to its official source.
| Export requirement | Region | What it means | Official source |
|---|---|---|---|
| Machinery safety conformity and CE marking | European Union | A powered milking machine fits the Commission's description of machinery: an assembly of components, at least one of which moves, driven by energy other than human or animal effort. CE marking can only be affixed after testing the product and performing the conformity assessment procedure. The instructions for use and the declaration of conformity are part of that process. Regulation (EU) 2023/1230 applies on a mandatory basis from 20 January 2027. | View source |
| Food contact rules for milk-contact parts | European Union | Liners, milk tubes, claws and milk pots touch the milk, so they are food contact materials in practice. The European Commission states that all food contact materials must comply with Regulation (EC) No 1935/2004 and be made under good manufacturing practice (Regulation (EC) No 2023/2006). | View source |
| ISO 5707 and ISO 6690 for milking machine installations | International | ISO lists ISO 5707:2007 (milking machine installations, construction and performance) and ISO 6690:2007 (milking machine installations, mechanical tests), replacing earlier editions now withdrawn. Ask the maker for a mechanical test record, and confirm with your importer which edition applies. | View source |
For milking machine manufacturers
diipl generates verified buyers for Indian milking machine manufacturers. We research which buyer segments and regions need your machine, run targeted outreach, verify each buyer's need, budget, authority and timeline, and arrange a direct meeting. We never publish your name, phone number or prices.
Start with a free Market Research Report
Tell us the milking machine you make. Our research team maps where your buyers are, then generates verified buyers matched to your capacity.
Milking Machine: frequently asked questions
Who makes milking machines in India?
diipl does not publish manufacturer names. Tell diipl your herd size, the animal type and the system you want. diipl then matches a manufacturer that has passed GSTIN verification and a capacity audit, confirms its IEC and the certifications your market needs, and arranges a direct meeting. For milking machines the audit looks at a vacuum pump test, a wet test with an artificial udder and water, pulsator output and the stainless steel finish of milk-contact parts.
What should I specify when buying a commercial milking machine?
Give the number and type of animals, the milking system (bucket, direct-to-can, pipeline or parlour) and the number of milking units. Then ask for vacuum pump capacity with a reserve, a vacuum regulator, pulsation rate and ratio, liner type, milk-contact materials, power supply and the cleaning method. A 1989 FAO guide gives 40 to 50 kPa as the normal working vacuum range for cows.
Which standards or certifications apply to milking machines?
The international standards for milking machine installations are ISO 5707 (construction and performance) and ISO 6690 (mechanical tests). ISO lists 2007 editions of both, replacing earlier editions that are now withdrawn. This page does not list an Indian Standard or Quality Control Order for milking machines, so ask the maker which standards its design follows and ask for test records. For the European Union, see the machinery and food contact points above.
What is the HSN code for milking machines?
Milking Machines are classified under ITC-HS 84341000 (milking machines), within HS subheading 843410. Some related machines use a different line: 84368090 when the quote is only for a powered rotary platform with its drive and no milking equipment. In a herringbone or rotary parlour the milking equipment takes this line, but no official text we could confirm settles the stalls, gates and platform quoted as one installation, so confirm it before you file. The export shipping bill carries this full 8-digit line; a GST invoice needs only its first 4 or 6 digits, depending on your turnover. Confirm the 8-digit line against your exact machine before you file.
Can Indian manufacturers export milking machines?
Yes. A maker with an IEC, GST registration and proper export packing can ship them. The paperwork depends on the buyer's region, and the European Union applies machinery and food contact rules. Match the pump motor to the local supply and send wear parts such as liners with the first order. diipl introduces verified makers to importers and arranges the meeting.
Which industries buy milking machines?
Buyers include commercial dairy farms, milk producer groups, farms run by trusts and institutions, and dealers who supply farms. India produced about 239 million tonnes of milk in 2023-24, and the largest producing states were Uttar Pradesh, Rajasthan, Madhya Pradesh, Gujarat and Maharashtra, according to NDDB.
I manufacture milking machines. How do I find verified buyers?
diipl studies which farm groups and regions need your type of set, such as bucket sets for shed herds or pipeline systems for larger farms, and runs outreach to them. Before any introduction, each buyer is checked for a real need, a budget, decision power and a buying timeline. diipl then arranges a direct meeting. Your name and contact details are never published.
How many milking units does my herd need?
It depends on herd size, the time you allow for milking and the unit time, which is the time one unit is tied up per animal including idle time. In the 1989 FAO worked example the average unit time is 6 minutes, and 2 units milk 20 cows an hour if the operator's routine stays within 3 minutes per cow. Give the maker your herd size and target milking time.
What vacuum and pulsation should a milking machine run at?
A 1989 FAO guide gives the normal working vacuum for milking cows as 40 to 50 kPa, with a regulator that holds it within plus or minus 2 kPa. Liners open and close about once each second, and for udder health the open to closed ratio is usually kept no wider than 70:30. Agree settings for your animals with the maker and ask for them to be recorded at commissioning.
How often should liners be changed and the machine tested?
A 1989 FAO guide advises renewing milking machine liners every six months or 2,000 cow milkings, and a full test by an experienced technician once a year. Liners and tubes are wear parts, so ask the maker for a spare kit, a service plan and the commissioning test record at handover.
Can one milking machine be used for both cows and buffaloes?
Often only with changes. A state agricultural university page says machines made for cattle have to be modified for buffaloes because udders and teats differ, and that a heavier cluster, a higher working vacuum and a faster pulsation rate are generally needed. It adds that the long milk and vacuum tubes should be aligned so the cluster weight sits evenly on the udder. Ask the maker for liner sizes and settings for each species.
More machinery
Related products
Buying or making milking machines?
diipl is a managed buyer-generation service, not a listing site. Buyers share a requirement and meet a verified Indian manufacturer directly; manufacturers get verified buyers without paying for listings or chasing enquiries.
in India
from abroad
this machine