Verified Tower Crane Manufacturers in India
A tower crane is a tall crane that stands on a building or infrastructure site and lifts materials. Contractors, developers and crane rental fleets buy it. diipl introduces buyers to verified Indian makers and books a direct meeting.
Also called: tower crane for building construction, hammerhead tower crane, flat top tower crane, luffing jib tower crane, self erecting tower crane.
in India
from abroad
this machine
What is a commercial tower crane?
A tower crane stands on a foundation or base and rises on a tall steel lattice mast. At the top, a slewing unit turns the working arm, called the jib, around the mast. On a trolley jib, a trolley runs along the jib and carries the hook. On a luffing jib, the jib itself tilts to change reach. A counter-jib behind the mast holds the counterweights and, on many models, the hoist winch. The operator works from a cab near the top or from a radio control. As a building rises, the crane is raised with it by adding mast sections, or it is tied to the structure.
This page covers commercial tower cranes for building, bridge and plant construction; mobile cranes, overhead cranes and light home-use hoists are not covered.
How diipl verifies tower crane manufacturers
diipl checks every tower crane manufacturer before a buyer meets them. Every seller is GSTIN verified and capacity audited. IEC and the certifications your product and market need (ISO, CE, REACH, BIS) are confirmed before any meeting; Certificate of Origin and EIC inspection are arranged per shipment where required.
For tower cranes, the capacity audit also covers:
- Mast and jib section fabrication on jigs, with welding procedures, welder records and inspection of the main chord welds
- Fitting and testing of the slewing ring, slewing gearbox and brake, either in-house or from an approved supplier with records
- A hoist winch test in the yard: rope reeving, drum grooving, brake holding and limit switch settings
- Electrical panel assembly, with calibration records for the load moment limiter and the limit switches
- A trial fit of mast sections, jib, counter-jib and counterweight blocks, so pins, bolts and rope runs are checked before dispatch
We match your requirement to a manufacturer that has passed these checks and arrange a direct meeting.
Types of tower cranes we cover
Indian tower crane manufacturers on the diipl bench build these commercial and industrial types.
| Type | Typical buyers |
|---|---|
| Hammerhead tower crane | Contractors and developers of large building and infrastructure projects |
| Flat-top (topless) tower crane | Contractors working on congested sites with shared airspace |
| Luffing jib tower crane | Contractors on tight, congested city sites and on tall structures |
| Self-erecting tower crane | Contractors on short jobs, residential work and tight sites |
| Climbing (external or internal) tower crane | Contractors of tall buildings |
Hammerhead tower crane
A hammerhead crane has a fixed horizontal jib with a trolley that moves the load in and out, and a counter-jib behind the mast. The whole top turns on a slewing unit. One source calls it a workhorse for heavy lifting and high-rise work where there is room to set up. Choose it for large sites with open working space.
Flat-top (topless) tower crane
A flat-top crane is a hammerhead-style crane without the tower-top cap and pendant lines, so its head is lower. One source says this lower profile helps on sites where several cranes share airspace or overhead clearance is limited. Choose it when height is restricted or several cranes work close together.
Luffing jib tower crane
A luffing jib crane raises and lowers its jib to change reach, instead of moving a trolley along a fixed jib. A maker page cites a small footprint, a compact counter-jib for space-restricted sites, and a low minimum radius that suits tight city sites. Choose it where space is tight or the site is congested.
Self-erecting tower crane
A self-erecting crane is a smaller crane that raises its own mast and unfolds its jib using hydraulics, so no separate assist crane is needed. One source ranks its capacity lowest of the four main types. Choose it for shorter jobs, residential work and tight or fast-moving sites.
Climbing (external or internal) tower crane
A climbing crane rises with the building. In external climbing, a climbing frame jacks the crane up so new mast sections can be inserted at the top. In internal climbing, the crane stands inside the building, often in a lift shaft or opening, and rises floor by floor on the completed floors below. Choose it for tall buildings.
What to specify when buying a tower crane
A clear tower crane specification gets you comparable offers and a faster meeting. Share these points with diipl and we match them to the right manufacturer.
| What to specify | Why it matters |
|---|---|
| Maximum load and the load chart at each radius | Capacity falls as the load moves out along the jib. One published model lists 20 t maximum and 4 t at its 80 m maximum radius. Give your heaviest lift and how far it travels. |
| Jib length and working radius | The jib length sets how far the hook reaches from the mast. Mark the farthest pick-up and drop points on the site plan, and ask for the jib length that covers them. |
| Hook height and how the crane gains height | State the final height of the building. Then agree whether the crane stays free-standing, is tied to the structure, climbs outside, or climbs inside the building. |
| Base type: concrete pad, ballasted chassis or inside the building | The crane stands on a reinforced concrete pad or a ballasted chassis, or sits inside the building. Ask for the foundation drawing and the loads on the base, and have an engineer check the soil. |
| Design code and duty class of the structure | IS 6521 Part 1 is the Indian code of practice for the design of static and rail-mounted tower cranes. Ask which code the mast, jib and base follow, and which duty class the design assumes. |
| Hoist reeving, hoisting speed and drive | On some luffing models, one-fall operation gives higher speeds and two-fall operation uses the full lifting capacity for heavier loads. Ask for speeds at each reeving and the drive type. |
| Slewing, trolley or luffing speeds and drive control | Speeds set the cycle time and how smoothly a load stops. Ask whether each motion has variable speed control and whether the luffing speed adjusts to the load, as on some luffing models. |
| Counterweight arrangement | The counterweight sits at the rear of the counter-jib and offsets the load on the jib. Ask for the counterweight set for each jib length, how the blocks are lifted into place and the weight of each block. |
| Overload and overturning moment protection | EU rules require devices that warn the driver and stop dangerous movements on overload or excess overturning moment, from a working load of 1,000 kg or a moment of 40,000 Nm. Ask how the device is calibrated. |
| Movement limits and anti-collision where cranes share a site | EU rules require movement limits, and a way to fit systems that avoid collisions where several rail-mounted or fixed machines work in one place. Ask what is fitted as standard and what is optional. |
| Wind limits in service and out of service | The crane must stay stable in service and out of service, including transport, assembly and dismantling. Ask for the wind speed limit for working and the out-of-service instructions in the manual. |
| Power supply, connected load and behaviour in a power cut | Match the site supply to the hoist, slewing and trolley motors. EU rules say the load must not creep dangerously or fall freely if the power supply fails, so ask how the brakes hold. |
| Cab, radio control and view of the load | The operating position should give the widest possible view of the moving parts, and movement controls should in general be hold-to-run. Ask about cab access, a hook camera and ground radio control. |
| Erection plan, load tests and handover records | EU rules require static and dynamic load tests before use, and the maker must take them at the place of use if the crane cannot be assembled at the factory. Ask for the erection plan, test certificates and manuals. |
Who buys tower cranes
Tower Cranes are bought by these commercial and industrial buyers, in India and abroad.
Buyers in India
- High-rise and large building contractors
- Real estate developers and the building contractors who work for them
- Crane rental companies that supply tower cranes to project sites
- Infrastructure contractors working on bridges
- Contractors building power and industrial plants
- Builders of houses and small apartment blocks who use compact self-erecting cranes
Buyers abroad
- Building contractors in the Middle East
- Crane rental companies in Africa
- Infrastructure and plant contractors in South-East Asia
HSN code and ITC-HS code for tower cranes
Tower cranes are classified under ITC-HS 84262000 (tower cranes), within HS subheading 842620 (cranes; tower cranes). The 6-digit subheading is the same in every country that uses the Harmonized System; the 8-digit ITC-HS line is the one India files.
In India the GST HSN code and the export ITC-HS code come from the same nomenclature. A GST invoice needs only the first 4 or 6 digits, depending on your turnover; the export shipping bill carries the full 8-digit ITC-HS line. The classification is shown here; the applicable GST rate is not. Official source.
Chapter
84
Machinery & Mechanical Equipment
Heading (4)
8426
Product group
Subheading (6)
842620
International, same worldwide
ITC-HS (8)
84262000
India files this line
Commonly confused with
Neighbouring subheadings under heading 8426. Misclassification between them is a common cause of a customs re-assessment.
- 842630 (Cranes; portal or pedestal jib cranes)
- 842619 (Cranes; transporter, gantry and bridge cranes)
- 842641 (Cranes; self-propelled derricks and cranes, on tyres, n.e.c. in heading no. 8426)
- 842649 (Cranes; self-propelled derricks and cranes, not on tyres, n.e.c. in heading no. 8426)
- 842691 (Cranes and derricks; designed for mounting on road vehicles)
India's exports, FY25-26
about $6.4 million
under ITC-HS 84262000. Source: DGCIS / MoC.
Your opportunity
Indian tower crane makers already ship this line abroad. diipl finds the markets where your machine can win and generates the verified buyers there.
A classification is a fact any lookup can give you. The correct code still does not tell you which countries are buying tower cranes right now, what duty each of them charges on the Indian line, or whether that demand is growing or fading. Those answers come from trade data, not from a code table, and they decide whether a market is worth entering. diipl's free Market Research Report answers them for your machine.
The markets that decide your strategy
Your free report shows who buys tower cranes from India the most, where demand grows steadily, and where it is emerging, so you target the markets you can actually win.
Who buys from India the most
The markets buying the most from India today.
- Top market
- Top market
- Top market
- Top market
- Top market
Where growth is consistent
Steady, rising demand, not one-off spikes.
- Top market
- Top market
- Top market
- Top market
Where demand is emerging
The fastest-growing import markets.
- Top market
- Top market
- Top market
- Top market
Buying a tower crane in India
- Check that the GST tax invoice shows the maker's GSTIN, the tax rate and the HSN code, and lists the mast sections, jib, counter-jib and counterweights.
- Agree erection in the contract: who supplies the assist crane for the first erection (self-erecting models raise themselves), who does the foundation work and who signs the load test at handover.
- Give the maker your site plan and soil report early. The foundation drawing and fixing parts must be ready before the crane arrives.
- Plan climbing and ties with your structural engineer, and ask the maker for the tie positions and the forces the building must carry.
- Ask for training of operators, riggers and signallers and a written lifting procedure for your site.
- Put spares and service in the contract: wire ropes, brake parts and limit switches, the response time of the service team, and a regular inspection plan that uses the Indian Standard for tower crane inspections as a guide.
Buying from Indian tower crane exporters
- Plan shipping around the long parts. Mast, jib and counter-jib sections and counterweight blocks travel in separate lots, so agree the Incoterm, the packing lists and who loads flat racks or containers.
- Ask for the documents an importer of this machine needs: load chart, erection and dismantling manual, foundation drawing with base loads, electrical diagrams, test certificates and the declaration of conformity.
- State your site voltage and frequency in the order, and ask the maker to build the motors and control panel for that supply.
- Agree the conformity route for your region before ordering. For the European Union a tower crane is not named in the higher-risk list, so the maker follows the internal production control route.
- Have the maker write the wind limits for working and for idle positions into the manual, and check them against local wind conditions and site rules for cranes.
- Plan remote support: a spares kit for ropes, brake parts and limit switches, plus video support during erection and the first climb.
Standards and certifications for tower cranes
Tower Cranes for each market must meet that market's rules. diipl confirms the certifications your market needs before any meeting. Each requirement below links to its official source.
| Indian standard or rule | What it covers | Official source |
|---|---|---|
| IS 6521 : Part 1 : 1972Code of practice for design of tower cranes: Part 1 Static and rail mounted | Code of practice for the design of static and rail-mounted tower cranes. BIS lists it as active and reaffirmed in 2020. Ask the maker whether the mast, jib and base design follow it. | View source |
| IS 14473 : Part 3 : 2022Cranes-Inspections - Part 3 Tower cranes | Covers inspections of tower cranes, and BIS lists it with ISO 9927-3 : 2019. Ask the maker and your safety officer which inspection routine the crane follows. | View source |
| IS 13367 : Part 1 : 1992Safe Use of Cranes - Code of Practice Part 1 General | General code of practice for the safe use of cranes. Part 1 covers cranes in general, so use it as a starting point for the site safety plan, not as a tower crane design rule. | View source |
| Export requirement | Region | What it means | Official source |
|---|---|---|---|
| EU conformity route and lifting rules for a tower crane | European Union | A tower crane is not named in Annex I of Regulation (EU) 2023/1230, the higher-risk list, so the maker applies internal production control (module A), draws up the technical documentation, affixes CE marking and issues an EU declaration of conformity. The Regulation replaces Directive 2006/42/EC from January 2027. Annex III section 4 on lifting applies: overload and overturning moment devices from a working load of 1,000 kg or a moment of 40,000 Nm, movement limits, and static and dynamic tests at the place of use if the crane cannot be assembled at the factory. | View source |
| Harmonised standards named for tower cranes | European Union | The Commission's summary list of harmonised standards under Directive 2006/42/EC names EN 14439 for tower cranes and EN 17076 for anti-collision systems on tower cranes. Ask the maker which edition the crane follows. | View source |
| Federal construction crane rules, section on tower cranes | North America | One federal regulator in North America has a section of its construction crane rules written for tower cranes. It asks for foundations and supports designed by the maker or a registered professional engineer, a pre-erection inspection of each component, and a wind speed indicator on the crane. During erecting, climbing and dismantling, wind must not exceed the speed the maker recommends. Give the importer the foundation loads, wind limits and climbing instructions. | View source |
For tower crane manufacturers
diipl generates verified buyers for Indian tower crane manufacturers. We research which buyer segments and regions need your machine, run targeted outreach, verify each buyer's need, budget, authority and timeline, and arrange a direct meeting. We never publish your name, phone number or prices.
Start with a free Market Research Report
Tell us the tower crane you make. Our research team maps where your buyers are, then generates verified buyers matched to your capacity.
Tower Crane: frequently asked questions
Who makes tower cranes in India?
Maker names are not published on diipl. Share the load, jib length and hook height you need, and diipl finds a maker with a verified GSTIN and a passed factory capacity audit. For tower cranes the audit looks at mast and jib welding, the slewing ring and winch, and a trial fit in the yard. For export orders diipl also confirms the Importer Exporter Code, then sets up a direct meeting.
Which load, jib length and hook height should I ask for?
Start with your heaviest single lift and how far from the mast it must travel, because capacity falls as the radius grows. Then give the jib length that reaches your farthest drop point, the final building height, and whether the crane will be tied or will climb. The maker uses these to choose a crane and supply the load chart.
Which standards or certifications apply to tower cranes?
BIS lists IS 6521 Part 1 as the code of practice for the design of static and rail-mounted tower cranes. The compliance section lists the Indian inspection and safe-use codes and the European rules. Ask the maker to state in writing which standards the crane follows, and ask for the certificates before you pay.
What is the HSN code for tower cranes?
Tower Cranes are classified under ITC-HS 84262000 (tower cranes), within HS subheading 842620. The export shipping bill carries this full 8-digit line; a GST invoice needs only its first 4 or 6 digits, depending on your turnover. Confirm the 8-digit line against your exact machine before you file.
Can Indian manufacturers export tower cranes?
Yes, when the crane meets the rules of the destination. For the European Union, a tower crane follows the internal production control route and carries CE marking with an EU declaration of conformity. Importers also check the load chart, wind limits, electrical supply and erection manual. Long mast and jib sections need careful export packing.
Which industries buy tower cranes?
Building contractors and developers use tower cranes where a project needs great height or a tight city site calls for a compact crane. Infrastructure contractors use them on bridge projects, and plant builders use them on power stations and industrial plants.
I manufacture tower cranes. How do I find verified buyers?
diipl studies which contractors, developers and rental fleets are planning projects that need your crane type and reach, then contacts them in the regions you choose. Only buyers whose project, budget, decision maker and timing check out are introduced, and diipl sets up a direct meeting. Your firm's name and contact details stay off the public site. Share your load range, jib lengths and erection support.
How do I choose between a hammerhead, flat-top and luffing jib crane?
A hammerhead crane suits heavy lifts where there is room to set up. A flat-top has a lower head and suits sites that share airspace with other cranes. A luffing jib crane raises its jib to change reach, so it suits tight, congested city sites. A self-erecting crane suits shorter jobs and needs no assist crane.
Does a tower crane need a special foundation and ties to the building?
Yes. The crane stands on a reinforced concrete pad or a ballasted chassis, or sits inside the building and climbs on the completed floors below. As the building rises it may be anchored to the structure. The foundation and the loads on the building should be designed for the crane, so ask the maker for the foundation drawing and the tie forces.
Which safety devices should a tower crane have?
EU rules require devices that warn the driver and stop dangerous movements when the load or overturning moment is exceeded, from a working load of 1,000 kg or a moment of 40,000 Nm. They also call for movement limits, a way to fit anti-collision systems where cranes share a site, and loads that cannot fall freely after a power failure.
How is a tower crane tested before it is used?
EU lifting rules require static and dynamic load tests on all lifting machinery before it is put into service. As a general rule for power-operated machinery the static test uses 1.25 times the maximum working load and the dynamic test 1.1 times. If the crane cannot be assembled at the factory, the maker takes the tests at the place of use. Ask for the test certificates at handover.
More machinery
Related products
Buying or making tower cranes?
diipl is a managed buyer-generation service, not a listing site. Buyers share a requirement and meet a verified Indian manufacturer directly; manufacturers get verified buyers without paying for listings or chasing enquiries.
in India
from abroad
this machine